JINPAT's pneumatic hydraulic rotary joints are designed to facilitate the uninterrupted transmission of fluids (such as hydraulic oil) and gases (such as compressed air) between stationary and rotating components. JINPAT's LPPA-LM series rotary joints can rotate 360 degrees. The transmission medium can be inert gas, such as compressed air or vacuum. A slip ring can be integrated to transmit various control signals. The sealing surfaces and sealing rings are made of special materials, offering advantages such as wear resistance, long service life, corrosion resistance, and leak prevention. Customers can install the LPPA rotary union independently according to their application environment.
LPPA-LM0601 Outline Drawing
Rotary Unions & Joints Spec |
Mechanical Data | |||
Max.Operating Pressure |
Positive Pressure: 10 Bar Vacuum: -95 kPa |
Working Speed |
0~300RPM |
|
Medium Type |
Air, Vacuum |
Working Temp |
-20°C~+100°C |
|
| Passages(Gas/Flow) | 6in 6out | Work Humidity | ≤85%RH | |
| Pipe Size |
M5 port (∅2~∅6mm pipe) |
Housing Material | Aluminum Alloy(black) | |
Torque |
≤1.2 N.m |
IP |
IP51 |
|
Features:
1.Continuable medium: compressed air, nitrogen, and other inert gases
2.Small size, light weight, low torque
3.Integrated power, switching signal, Ethernet, USB, industrial bus, sensor and other signals
4.Customized rotary joint parameters and integrated slip ring can be customized according to customer requirements
5.The joint and pipe diameter can be customized according to customer requirements
1. The mounting position of the slip ring is matched with the equipment. It is necessary to connect the air pipe at the rotor end to ensure that there is no leakage.
2. Debug the concentricity of the rotor before installation and ensure the smooth rotation of the slip ring.
3. The stator is screwed into the anti-rotation rod through the anti-rotation hole to stop rotation, and can also be customized according to customer requirements.
Precautions for Installation of Rotary Joints
1. Rotary joints should prevent impact and drop during delivery and storage to avoid damage to the interface and internal parts.
2. The bolts for fixing need to be loosened.
3. When installing the rotary joints, it should be noted that the thread direction of the inner and outer tubes corresponds to the rotation direction of the drum, and the thread rotation direction of the inner and outer tubes should also be the same.
4. The inlet and outlet of the rotary joint should be connected directly to the hose as much as possible. The transmission
MAIN APPLICATIONS:
Industrial automation equipment
Packaging equipment
SMT machine equipment
Testing equipment
Robot