The LPKS005 Series Pancake Slip Ring, a compact and versatile rotary connector designed for applications with limited axial space. This innovative slip ring features a separated rotor and stator configuration with a 5mm through-hole, providing additional flexibility for routing cables or shafts. The LPKS005 series offers customizable options with 1 to 10 channels, making it ideal for transmitting power, signals, or a combination of both across a rotating interface. Its low-profile design and optional channels make it a perfect fit for various industries, from robotics to medical devices, where reliable connections and efficient use of space are crucial.
Electronic & Electric |
Mechanical | |||
Circuits |
Total |
1-10 CKT |
Working Speed |
0~100rpm |
Detail |
10×5A |
Inner Diameter |
∅5.0mm |
|
Rating Voltage |
240VDC |
Contact Material |
Precious Metal |
|
Dielectric Strength |
300VAC@50Hz |
Housing Material |
FR-4 |
|
Insulation Resistance |
≥300MΩ@300VDC |
Lead Wire Length |
Stator:300mm Rotor:300mm |
|
Environment |
Remarks | |||
Working Temperature |
-20°C~+60°C |
Application |
/ |
|
Working Humidity |
≤60%RH |
Other |
/ |
|
IP |
/ |
Note: "P" stands for power, "S" stands for signal. |
||
Features:
Advanced Light Contact Technology|Ultra-Long Service Life|Space-Saving Design|High Reliability|Customizable Options|Reduced Maintenance Costs
Ultra-Thin Profile：minimum thickness up to 5.4m
Space-Saving Design
Transmit analog and digital signal
High-Quality Materials
Shock-resistant, maintenance-free
The power and signal are mixed transmitted, and the signal categories are as follows:
◎Ethernet: Rate (10Mbps/100Mbps/1000Mbps)
◎Industrial Ethernet: ProfiNet, Powerlink, SercosIII, EtherCAT, EtherNet/IP, etc.
◎HD video: SDI, LVDS, etc.
◎Serial communication: RS232, RS485, RS422, etc.
◎Universal Serial Bus: USB2.0
◎Industrial Fieldbus: CANBus, CC-Link, InterBus, DeviceNet, ProfiBus, etc.
◎Sensor signal: thermal resistance, thermocouple, strain gauge, etc.
LPK Pancake Slip Rings Installation Guide:
1. First install the rotor side. Fix the rotor PCB board to the flange of the device with the corresponding screws
2. Then install the stator side. Fix the stator PCB board to the flange of the device with the corresponding screws
3. Debug the coaxiality of the slip ring. The brush shrapnel contacts on the stator side must be adjusted to the center of the rotor side ring to ensure the coaxiality between the slip ring and the device
4. Debug the distance between the two PCB boards. The distance between the stator side PCB board and the rotor side PCB board is L (+0.1/+0.3) mm
Main Applications:
◎ Military Equipments
◎ Medical Equipments
◎ Wind Turbine
◎ Test Equipment
◎ Revolving Door
◎ Robot